Kungiyoyi
Tuntube mu
ya faɗi carbide sanda diamide 1.1 * 120 mm super bakin bar h6
Imel：
ya faɗi carbide sanda diamide 1.1 * 120 mm super bakin bar h6
Ya faɗi carbide tungs na carbide
1. 100% virgin raw materials.
2. Abubuwa daban-daban na maki sune kasashen waje dangane da aikace-aikacen abokin ciniki.
3. Muna da kayan aikin samarwa da kayan aikin samarwa da kayan aikin waje don tabbatar da ingantattun kayayyaki masu inganci.
4
5
6. Fasaha ta ci gaba, ingancin nagari.
Gwadawa
1. Rubutun Rubuta: Ød × l
2
3. Diamita: 3mm zuwa 30mm
4. Tsawon: Standard 330mym / 310mm ko aka tsara
5. Surface: blank ko ƙasa
6. Abu: WC + CO
| Sunan Samfuta | Sosai mai ƙarfi carbide blank da ƙasa |
| Abu | WC + CO |
| Daraja | K05-K40 |
| Girman hatsi | lafiya, matsakaici |
| Ƙanƙanci | 87.6-94HRA |
| T.r.s | 3000-4200 |
| Farfajiya | blank ko ƙasa |
| Roƙo | Amfani da masana'antu na yankan masana'antu kamar endlills, drills, maimaitawa da kuma hakoran hakora |
Roƙo
Sundunan Tungsten Carbide ana amfani da su ne don kawo ƙarshen injin da rawar jiki tare da yankan katako mai ɗorewa tare da katako mai ƙarfi tare da ɗimbin katako mai ɗorewa tare da ɗakunan katako mai ɗorewa tare da ɗimbin katako mai ɗorewa tare da ɗakunan katako mai ɗorewa. Yana adana fasali kamar yadda kayan aikin injin din, mai sauƙin walƙewa, da sauransu kayan carbide na ainihi / budurwa mai inganci kuma yana da kyau sosai.
| Daraja | Iso | Girman hatsi | Cobalt abun ciki (wat-%) | Denenity g / cm3 | Hardness Hra | Tsine wa (N/mm2) | Somlpication |
| K10UF | K05-K10 | 0.6 | 6.0 | 14.8 | 94 | 3800 | Girman hatsi na Ulfina, tare da kyakkyawan sa mai tsayayyen.higher sa mai jure ƙarshen fili da kuma kayan aikin suna bada shawarar. |
| CD6 | K10 | 1.0 | 6.0 | 14.95 | 92 | 3000 | Drilk enmill da Burr suna ba da shawarar.Se dace dace da yankan karfe da kuma zane-zane ana buƙata). |
| K20UF | K20 | 0.7 | 8.0 | 14.6 | 92.5 | 3200 | Don yankan aluminium na musamman. |
| K40UF | K30 | 0.6 | 10 | 14.4 | 91.8 | 3000 | An ba da shawarar rawar jiki da endmill. Ya dace da yankan bakin karfe steek zafi resistant reform da kuma jefa baƙin ƙarfe. |
| CD15 | K40 | 1.5 | 15 | 14 | 87.6 | 4000 | Ya dace da yin nau'i na molds, kayan aikin da mashaya mai ban sha'awa da sauransu da sauransu. |
Gwadawa
Ba tare da ramuka ba.3-30 * 100/110 / 330mym H6 da aka goge
FAQ:
Q1: Shin ku masana'anta ne ko kamfani na kasuwanci?
Mu ne Factory da shekaru 12 na samar da kwarewa.
Q2: Ina ma'aikatar ku take?
Muna cikin birnin Zhuzhou, lardin Hunan inda tushen tushen carbide tungsten yake.
Q3: Shin Farashin Gasa ne?
Muna da namu Factory. Godiya ga tsarin samarwa mai ƙarfi da rarrabawa, mun yi alkawarin ba abokan cinikinmu mafi kyawun farashi.
Q4: Shin samfuran suna da inganci?
Ee. Za a gwada duk samfuran kafin samarwa da yawa, kuma za mu bincika kaddarorin jiki, siffa da haƙuri don tabbatar da samfuran da suka cancanta kafin jigilar kaya.
Jin dadin tuntube ni:
Aimee
Manajan tallace-tallace
Kudin hannun jari Zhuzhou Chuangde Cemented Carbide Co., Ltd
215, building 1, International Students Pioneer Park,
TaishanRoad, Gundumar Tianyuan, Birnin Zhuzhou.
Imel:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
WhatsApp/wechat/Skype: 0086 13786352688
Samfura masu alaƙa
Aika wasiƙar US
Kudin hannun jari Zhuzhou Chuangde Cemented Carbide Co., Ltd
Haɗa215, gini 1, Filin Majagaba na Ƙasashen Duniya, Titin Taishan, gundumar Tianyuan, birnin Zhuzhou
Aika wasiƙar US
Haƙƙin mallaka ：Kudin hannun jari Zhuzhou Chuangde Cemented Carbide Co., Ltd
Sitemap
XML
Privacy policy
