YG8 dị elu Cemented Tungsten Square Carbide Strip

Ụlọ

KPỌTỤRỤ ANYỊ

YG8 dị elu Cemented Tungsten Square Carbide Strip

100% tungsten carbide na-amaghị nwoke

Ọkwa: YG8

Nha: 2*8*22mm

Ngwa: Cuttng tools

Email：

info@cdcarbide.com

Nzaghachi

YG8 dị elu Cemented Tungsten Square Carbide Strip

Nkọwa nke ngwaahịa

Eriri carbide Tungsten nwere isi ike dị elu yana nguzogide iyi dị elu, ọ bụ nhọrọ kacha mma iji na-egbutu ojiji.

Site na akụrụngwa akụrụngwa dị elu yana akụrụngwa dị elu, Zhuzhou CD na-enye mma mma carbide kacha mma ndị ahịa.

Mfe na-brazed, ezi eyi na-eguzogide na toughness.Untrafine ọka size raw ihe na- magburu onwe ike na hardness.Both ọkọlọtọ nha na customizes nha dị.

Ọkwa

Ngwongwo na ngwa nke eriri carbide
Ọkwa	Njupụta	T.R.S MPa	Isi ike HRA	Arụmọrụ & ngwa kwadoro
CD6	14.9	2150	90	Ezigbo mma mgbochi uwe, nke ejiri osisi siri ike, jiri maka ya nhazi osisi izizi, mmanya akụkụ aluminom, mkpanaka ọla na igwe nkedo.
CD6A	14.9	1860	92	Has wear resistance higher than YG6, used for nhazi osisi siri ike, osisi izizi, aluminom Ogwe ngalaba, ọla mkpanaka na igwe nkedo.
CD8	14.7	2320	89.5	Yiri na nguzogide percussion , eji na nhazi osisi siri ike, osisi dị nro, ferrous na na-abụghị igwe.
CD2T	14.5	2350	92	Ọmarịcha carbide, Nguzogide yi dị elu, ehulata dị elu ike, dị elu nguzogide na njikọ, ọkụ ọkụ dị elu ike. Nrụpụta alloys na-emegharị ahụ, igwe anaghị agba nchara ígwè na dị elu manganese steel, wdg.
CD25	14.5	2150	92.2	Yiri ngbochi na ike tụnyere dị elu, dabara maka ịhazi ígwè ígwè, na-abụghị ígwè, metal na ihe na-abụghị metalid.
CD10X	14.45	91.8	3000	Yiri nkwụsi ike na ike dị elu karịa, dabara adaba maka iji ígwè nkedo, ígwè na-abụghị ígwè na ihe ndị na-abụghị metalild.
Other grades of strips may be offered according to customers' requirement.

Ngwa

Enwere ike iji ya dị ka ndị na-egbutu osisi na-egbutu ígwè, ọla ndị na-abụghị ndị na-emepụta ihe, plastik, eriri kemịkalụ, igwe anaghị agba nchara na ígwè manganese dị elu, wdg, na-eme ka ngwá ọrụ na-egwupụta ihe, ihe ndị na-egwuputa ihe, ngwá ọrụ na-egwepịa ihe, ihe nha nha, eyi akụkụ, cylinder liners, nkenke. bearings, nozzles na metal ebu, wdg.
1.Suitable maka ịgwọ osisi siri ike, osisi ịcha na njupụta fiberboard nke etiti.
2.Be eji eme woodworking ngwá ọrụ, dị ka akpụ ngwá ọrụ, reamer, serrated mma agụba na dị iche iche agụba.
3.dabara maka machining osisi siri ike, osisi mbụ yana ogwe akụkụ aluminom, mkpanaka ọla.
4, A na-ejikarị dị ka ngwaọrụ ịkpụ maka ọkara akpaka lathe, akpaka lathe na igwe atụmatụ.
5, Ejiri ya dị ka ndụmọdụ rotor VSI maka igwe na-etipịa nkume.
6, Tinyere dị ka ndị na-egbutu plastik na ụtaba.

7, nke a na-ejikarị dị ka ụgbọ okporo ígwè Guideless maka igwe igwe na-egweri.

8, Tungsten carbide warara dịkwa mma maka mmepụta nke ụdị dị iche iche nke moto, eletrọnịkị na-aga n'ihu na-anwụ anwụ, wdg.

A na-anwale ihe niile n'ihe siri ike, njupụta na T.RS tupu eji ya.

Ajụjụ:

Q1: Ị bụ Factory ma ọ bụ trading ụlọ ọrụ?
Anyị bụ Factory na 12 afọ nke mmepụta ahụmahụ.

Q2: Ebee ka ụlọ ọrụ gị dị?
Anyị nọ n'obodo Zhuzhou, mpaghara Hunan ebe isi tungsten carbide dị.

Q3: Ọnụ ahịa a na-asọmpi?
Anyị nwere Factory nke anyị. Ekele maka mmepụta na usoro nkesa siri ike, anyị na-ekwe nkwa ịnye ndị ahịa anyị ọnụahịa kachasị asọmpi.

Q4: Ngwaahịa ndị a hà dị oke mma?
Ee. A ga-anwale ngwaahịa niile tupu mmepụta nnukwu, na anyị ga-elele njirimara anụ ahụ, ọdịdị na ndidi maka ijide n'aka ngwaahịa ruru eru tupu mbupu.

Enwere onwe gị ịkpọtụrụ m:

Aimee
Onye njikwa ịre ahịa

Ụgwọ nke ụlọ ọrụ Zhuzhou Chuangde Cemented Carbide Co., Ltd
215, building 1, International Students Pioneer Park,
TaishanRoad, Tianyuan Distrikti, City Zhuzhou .
Email:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
WhatsApp/wechat/Skype: 0086 13786352688

Ngwaahịa ndị metụtara