dayameta mkpanaka carbide cimented 1.1 * 120 mm super thin bar h6

Ụlọ

KPỌTỤRỤ ANYỊ

dayameta mkpanaka carbide cimented 1.1 * 120 mm super thin bar h6

Akụkụ: φ1.1 * 120 mm, φ0.35 * 120 mm

ISO koodu akara: K01,k10,K20,k30,K40

Njupụta: 12.75-15.3 G/cm3

Ụdị: h6

Email：

info@cdcarbide.com

Nzaghachi

dayameta mkpanaka carbide cimented 1.1 * 120 mm super thin bar h6

Carbide Tungsten Carbide mkpanaka cimented

1. 100% virgin raw materials.

2. Dị iche iche iche iche nke akara ule na-availalbe dabeere ahịa ngwa.

3. anyị nwere ọkachamara elu mmepụta akara na inspeciton equipments iji hụ na elu àgwà ngwaahịa.

4. Nkenke Ground na elu polishing usoro

5. Akwa mkpuchi mkpuchi, ike siri ike na mmetụta siri ike

6. Nkà na ụzụ dị elu, nke ọma na-egweri.

Akụkụ

1. Ụdị nkọwapụta: ØD×L

2. Ngwa: n'ihi na-eme ka ịcha ngwá ọrụ, dị ka ihe atụ ọgwụgwụ ọgwụgwụ, eze burs, reamer wdg

3. Dayameta: 3mm ruo 30mm

4. Ogologo: ọkọlọtọ 330mm / 310mm ma ọ bụ ahaziri

5. Elu: oghere ma ọ bụ ala

6. Ihe: WC+CO

Aha ngwaahịa	Mkpara carbide siri ike oghere na ala
Ihe onwunwe	WC+CO
Ọkwa	K05-K40
Nha ọka	mma, ọkara
Isi ike	87.6-94HRA
T.R.S	3000-4200
Elu	oghere ma ọ bụ ala
Ngwa	A na-eji ya maka nrụpụta ngwa ọrụ dị ka igwe ihe ngwucha, ihe akpụ, reamers na ọnya eze

Ngwa

A na-etinye mkpanaka Tungsten carbide maka igwe igwe na-akụ mkpụrụ na ọkwa sub-micron YL10.2, maka igbutu nkenke na-abụghị nke ferrous na igbutu osisi na ọkwa ọka micro-micron YG6X, yana maka fiberglass mesikwuru plastik, alloys titanium, ígwè siri ike nwere. ultra-mma ọka ọkwa YG8X, ECT. Ọ na-ejigide atụmatụ dị ka ihe nrụzi n'ibu, dị mfe ịgbado ọkụ, elu eyi-eguzogide, wdg All nke anyị tungsten Carbide Ngwaahịa na-mere si elu-ọcha Original / Virgin Raw Materials na HIP / Sintered, na-nnọọ elu àgwà na magburu onwe arụmọrụ. .

Ọkwa	ISO	Nha ọka	Ọdịnaya Cobalt (wt-%)	Njupụta g/cm3	Isi Ike HRA	TRS (N/mm2)	Ngwa
K10UF	K05-K10	0.6	6.0	14.8	94	3800	Ultrafine ọka size, with good wear resistant.higher wear eguzogide endmill na osise ngwá ọrụ na-atụ aro.suitable maka ịcha PCB na plastic.
CD6	K10	1.0	6.0	14.95	92	3000	A na-atụ aro ihe ọṅụṅụ mmanya na-egbu egbu na burr. Karịsịa kwesịrị ekwesị maka ịkpụ ígwè na-abụghị ígwè na graphite (mkpuchi dị mkpa).
K20UF	K20	0.7	8.0	14.6	92.5	3200	Maka ịkpụ nke aluminom pụrụ iche.
K40UF	K30	0.6	10	14.4	91.8	3000	A na-atụ aro ịkụ ọkpọ na igwe ihe. Kwesịrị ekwesị maka igbutu igwe anaghị agba nchara okpomọkụ na-eguzogide alloy na nkedo ígwè.
CD15	K40	1.5	15	14	87.6	4000	Kwesịrị ekwesị maka ịme ọkpọ nke ebu, ngwa ọrụ na mgbochi ịma jijiji na-agwụ ike wdg.

Akụkụ

Na-enweghị oghere OD0.3-30*100/110/300/330mm h6 nchachapụrụ

YL10.2 Cemented carbide Tungsten carbide rods bars

A na-anwale ihe niile n'ihe siri ike, njupụta na T.RS tupu eji ya.

Ajụjụ:

Q1: Ị bụ Factory ma ọ bụ trading ụlọ ọrụ?
Anyị bụ Factory na 12 afọ nke mmepụta ahụmahụ.

Q2: Ebee ka ụlọ ọrụ gị dị?
Anyị nọ n'obodo Zhuzhou, mpaghara Hunan ebe isi tungsten carbide dị.

Q3: Ọnụ ahịa a na-asọmpi?
Anyị nwere Factory nke anyị. Ekele maka mmepụta na usoro nkesa siri ike, anyị na-ekwe nkwa ịnye ndị ahịa anyị ọnụahịa kachasị asọmpi.

Q4: Ngwaahịa ndị a hà dị oke mma?
Ee. A ga-anwale ngwaahịa niile tupu mmepụta nnukwu, na anyị ga-elele njirimara anụ ahụ, ọdịdị na ndidi maka ijide n'aka ngwaahịa ruru eru tupu mbupu.

Enwere onwe gị ịkpọtụrụ m:

Aimee
Onye njikwa ịre ahịa

Ụgwọ nke ụlọ ọrụ Zhuzhou Chuangde Cemented Carbide Co., Ltd
215, building 1, International Students Pioneer Park,
TaishanRoad, Tianyuan Distrikti, City Zhuzhou .
Email:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
WhatsApp/wechat/Skype: 0086 13786352688

Ngwaahịa ndị metụtara