Manufacturer Hard facing  bar Tungsten Carbide Grit tungsten carbide composite welding rod

Tungsten carbide copper Brazing Rod YD-5 it is made of by sintering tungsten carbide scrap and elastic matrix alloy,Outer layer of the special flux and coloring is marking scrap grade,the composition of sintering tungsten carbide scrap is mainly CO and WC,The hardness is HRA 89~91,tire body matal is Ni and copper alloy,strength can up to 690MPa, hardness HB≥160.

 Production  of  Manufacturer Hard facing  bar Tungsten Carbide Grit tungsten carbide composite welding rod

The oxyacetylene butt, the operating process is as follows:

(1) clean up the workpiece, make the welding workpieces surface with metallic luster.

(2) the flat position of welding, therefore can use the appropriate clamping fixture for control of surfacing layer thickness, thick piece of available.

(3) with a neutral flame preheating, flame core not contact surface, the distance to 25 mm is advisable.

(4) carbide surfacing welding layer.With YD type electrode surfacing, the use of neutral flame (can be slightly carbonizing flame) tip is steady on the workpiece surface movement, the flame of the alloy electrode heating (be careful not to make flame cone tip contact alloy particles), tire body in the electrode alloy melt, carbide particles are also falling.Before the tire body of molten metal solidification, the particles arrange, can use left hand of the alloy electrode fingers, or another person holding a base electrode or pull rod on graphite rod in a quick stir particles, making them evenly aligned neatly.Surfacing layer thickness control according to the requirements of design.

(5) after the workpiece welding, where no ventilation, slow cooling, cannot quench, conditional usable asbestos blanket cover.

(6) the workpiece after cooling to room temperature, if necessary, grinding surface surfacing to required size and shape.

(7) clean up the workpiece, remove all splash, slag, etc.

Application of  Manufacturer Hard facing  bar Tungsten Carbide Grit tungsten carbide composite welding rod

YG Series Cemented Carbide Surfacing Rod is mainly used for surfacing the severely worn or cut workpieces in

petroleum, mining, coal mining, geology, construction and other industries, such as milling shoes, grinding shoes, centralizers, reamers, drill pipe joints, hydraulic cutters, scraper blades, coal plough bits, coring bits, piling bits, auger bits, etc.

सबै सामग्रीहरू प्रयोग गर्नु अघि कठोरता, घनत्व र T.R.S को सर्तमा परीक्षण गरिन्छ।

FAQ:

Q1: तपाईं कारखाना वा ट्रेडिंग कम्पनी हुनुहुन्छ?
हामी उत्पादन अनुभव को 12 वर्ष संग कारखाना हो।

Q2: तपाईंको कारखाना कहाँ अवस्थित छ?
हामी झुझाउ शहर, हुनान प्रान्तमा अवस्थित छौं जहाँ टंगस्टन कार्बाइडको आधार छ।

Q3: मूल्य प्रतिस्पर्धी छ?
हाम्रो आफ्नै कारखाना छ। बलियो उत्पादन र वितरण प्रणालीको लागि धन्यवाद, हामी हाम्रा ग्राहकहरूलाई सबैभन्दा प्रतिस्पर्धी मूल्य प्रस्ताव गर्ने वाचा गर्छौं।

Q4: के उत्पादनहरू उच्च गुणस्तरका छन्?
हो। सबै उत्पादनहरू थोक उत्पादन अघि परीक्षण गरिनेछ, र हामी ढुवानी अघि योग्य उत्पादनहरू सुनिश्चित गर्न भौतिक गुणहरू, आकार र सहिष्णुता जाँच गर्नेछौं।

मलाई सम्पर्क गर्न नहिचकिचाउनुहोस्:

एमी
बिक्री प्रबन्धक

Zhuzhou Chuangde Cemented Carbide Co. Ltd
215, building 1, International Students Pioneer Park,
TaishanRoad, Tianyuan जिल्ला, Zhuzhou शहर।
इमेल:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
Whatspp/wechat/Skype : 0086 13786352688