Tungsten carbide Yakakwirira Hunhu Yakanaka Ground YG8 Round Rod Bar

Kumba

TAURA NESU

Tungsten carbide Yakakwirira Hunhu Yakanaka Ground YG8 Round Rod Bar

Giredhi:YG8

Dimension: Inogona kugadzirwa kana chiyero

zvinhu: 100% tungsten carbide

Email：

info@cdcarbide.com

Feedback

Tungsten carbide Yakakwirira Hunhu Yakanaka Ground YG8 Round Rod Bar

Application

Solid cemented carbide rods (carbide rod bar / solid carbide rod mutengo / carbide rod blanks inogona kushandiswa kugadzira akasiyana dhill bits, mota yakakosha cutter, yakadhindwa yedunhu bhodhi, special cutters, injini yakakosha cutters, horology, kugadzirisa akakosha ekucheka, akakosha vertical milling. cutter, graver uye etc.

Kunze kwezvo, anogona kushandiswa kugadzira simende ye carbide stamping musoro, core bar uye perforation maturusi.
Iyo simende tsvimbo ye carbide inoshandiswa kucheka aluminium alloy, simbi yakakandwa, simbi isina tsvina, refractory alloy simbi, nickel based alloy, titanium alloy uye non ferrous simbi, akasiyana carbide mamakisi ane yakagadzikana zvivakwa ave achizivikanwa zvakanyanya nevagadziri vezvishandiso pasi rese. Isu tinokwanisa kugadzira iyo isina kuvhurika uye yakagadzikwa carbide tsvimbo.

Zvimiro zveCemented carbide rod
1. simba rakakwirira uye kuoma kukuru.
2. kuoma kwakanyanya, kupfeka-kusamira, yakakwirira elastic modulus, yakakwirira flexural simba,
3. kugadzikana kwakanaka kwemakemikari (asidhi, alkali, yakanyanya tembiricha oxidation), kukanganisa kuramba,
4. kusimba kwakanaka, kuderera kwekofi yekuwedzera nezvimwe.

Kukura kwezviyo: 1.2; 1.0; 0.8; 0.7; 0.6; 0.5; 0.4

Kureba kureba: 3mm--1400mm

Surface Roughness inogona kusvikwa ku: RA0.04.(svika pagirazi rekuita pamusoro mushure mekukuya chaiko)

Dhayamita renji: 0.1mm--60mm.

Dhiyamita Giredhi: h5(H5), h6(H6), h7(H7), h8(H8), h9(H9).

Giredhi chati

Giredhi	ISO	Saizi yezviyo	Cobalt Content (wt-%)	Density g/cm3	HARDNESS HRA	TRS (N/mm2)	KUITA
K10UF	K05-K10	0.6	6.0	14.8	94	3800	Ultrafine saizi yezviyo, ine good wear resistant.higher wear resistant endmill uye engraving tools zvinokurudzirwa.zvakakodzera kucheka PCB nepurasitiki.
CD6	K10	1.0	6.0	14.95	92	3000	Drilk endmill uye burr inokurudzirwa.Inonyanya kukodzera kucheka simbi isina-ferrous uye graphite (kupfeka kunodiwa).
K20UF	K20	0.7	8.0	14.6	92.5	3200	Yekucheka aluminium zvakanyanya.
K40UF	K30	0.6	10	14.4	91.8	3000	Drill uye endmill zvinokurudzirwa. Inokodzera kucheka Stainless steek heat inodzivirira alloy uye cast iron.
CD15	K40	1.5	15	14	87.6	4000	Yakakodzera kugadzira punching ye molds, zvishandiso uye anti -vibration boring bar etc.

Detail image

Tungsten carbide High Quality Finely Ground YG8 Round Rod Bar

Zvese zvinhu zvinoedzwa maererano nekuoma, density uye T.R.S usati washandisa.

FAQ:

Q1: Iwe uri Fekitori kana kambani yekutengesa?
Isu tiri Fekitari ine makore gumi nemaviri ehunyanzvi hwekugadzira.

Q2: Fekitari yako iri kupi?
Isu tiri muguta reZhuzhou, mudunhu reHunan uko kune base tungsten carbide.

Q3: Mutengo Unokwikwidza here?
Tine Factory yedu. Kutenda kune yakasimba kugadzira uye kugovera sisitimu, isu tinovimbisa kupa vatengi vedu mutengo wakakwikwidza.

Q4: Zvigadzirwa zvemhando yepamusoro here?
Ehe. Zvese zvigadzirwa zvichayedzwa pamberi pekugadzirwa kwakawanda, uye isu tichatarisa zvimiro zvemuviri, chimiro uye kushivirira kweve nechokwadi kuti zvigadzirwa zvinokodzera usati watumirwa.

Sunungukai kundibata:

Aimee
Sales manager

Zhuzhou Chuangde Cemented Carbide Co., Ltd
215, building 1, International Students Pioneer Park,
TaishanRoad, Tianyuan District, Zhuzhou City.
Email:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
Whatspp/wechat/Skype : 0086 13786352688