Tungsten Carbide Rotary Burrs: Karohano ea Mohlala, Tataiso ea Khetho, le Likopo tsa Core

Tungsten carbide rotary burrs ke lisebelisoa tsa ho seha tse sebetsang hantle haholo tse sebelisoang haholo ho sebetsa ka tšepe. Li tsejoa ka ho thatafala ha tsona, ho se mamelle, le ho feto-fetoha ha maemo, lisebelisoa tsena li sebelisoa haholo indastering ea ho etsa hlobo, ea likoloi, ea sefofane le ea ho lokisa mechini. Sengoliloeng sena se hlahisa mefuta ea mantlha ea li-rotary burrs, se fana ka tataiso e sebetsang ea khetho, 'me se hlalosa likarolo tsa bona tsa mantlha tsa kopo.

1. Ho utloisisa Mefuta ea Rotary Burr

Carbide rotary burrs e tla ka libopeho tse fapaneng le litlhophiso tsa meno. Khoutu ea mohlala hangata e bonahatsa sebopeho sa hlooho, mofuta oa leino la ho rema, le bophara ba shank.

Libopeho tse Tloaelehileng tsa Hlooho:

• Mofuta oa A (Cylindrical): E nepahetse bakeng sa boemo bo holimo le ho qeta ka hare ho lehlakoreng le letona.

  
  

• Mofuta oa C (Sebōpeho sa Bolo): E loketse groove smoothing le concave surface profiling.

  
  

• Mofuta oa D (Ball-nose Cylinder): E ntle bakeng sa ho qeta seam ea welding le libaka tse kobehileng.

  
  

• Mofuta oa F (Oval): E etselitsoe li-contours tse rarahaneng le li-profaele tse kobehileng.

  
  

• Mofuta oa G (E sebopeho sa Lelakabe): E nepahetse bakeng sa li-cavities tsa hlobo le likhutlo tse thata.

  
  

• Type L (Taper with Rounded End): E loketse bakeng sa ho qeta sekoti se tebileng le sekoti sa tapered.

  

Mekhoa ea meno:

• Single Cut: Bakeng sa litšepe tse entsoeng ka tšepe tse kang tšepe le tšepe e sa hloekang, tse fanang ka ho tlosa thepa ka potlako le qetello e boreleli.

• Habeli Cut: Moralo oa sefapano o fokotsa boholo ba chip le ho thothomela; e loketseng litšepe tse bonolo joalo ka aluminium, koporo le koporo.

• Aluminium Cut (Aluma Cut): Ho arohana ha meno ka mabifi bakeng sa lisebelisoa tse bonolo-ho thibela ho koala.

• Coarse Cut: E sebelisetsoa ho tlosa thepa ka potlako mesebetsing e boima, joalo ka ho tlosa slag kapa sprue.

  
  

  
  

  
  

2.Sekhetho sa Tataiso

Khetha mokhoa o nepahetseng oa meno:

• Litšepe tse thata → Sekoahelo se le seng

• Litšepe tse bonolo le polasetiki → Seha habeli kapa sehiloeng sa aluminium

• Ho tlosoa ha thepa e boima → Sehiloeng se mahoashe

  
  

Sebaka sa Machining le Sebopeho

Khetha sebopeho sa hlooho ea burr ho latela geometry ea sebaka se tla etsoa:

3.Shank Diameter Compatibility

Mefuta e tloaelehileng ea shank ke 3mm, 6mm, le 1/4 inch, e lokelang ho lumellana le collet ea sesebelisoa sa hau (pneumatic grinder, rotary tool, joalo-joalo). Lishanka tse kholo li fana ka botsitso bo eketsehileng bakeng sa mesebetsi e boima.

4.Litlhoko tsa Kopo

• Bakeng sa ho sebetsa ka thata: Sebelisa lihlooho tse kholo tse nang le meno a mahoashe.

• Bakeng sa lintlha tse hlakileng tsa mosebetsi: Sebelisa lihlooho tse nyenyane tse nang le likhahla tse ntle kapa tse peli.

  
  

5.Core Kopo

Tungsten carbide rotary burrs e sebeletsa mefuta e mengata ea liindasteri. Ka tlase ke lisebelisoa tse tsebahalang haholo:

A、Mould Manufacturing

• Cavity shape, ho qeta bokaholimo, le tokiso ea weld.

• Li-burrs tse bōpehileng joaloka lelakabe li na le thuso bakeng sa li-contours le likhutlo tse thata tsa ka hare.

B, Ts'ebetso ea Mechini le Tlhokomelo

• Ho phunya, ho hloekisa ka bohale, ho hloekisa seam, le ho tlosa hlobo.

• E loketse bakeng sa phekolo ea post-casting kapa post-welding ea likarolo tsa tšepe.

C, Liindasteri tsa Aerospace le Likoloi

• E sebelisoa ha ho etsoa deburring le ho phethela likarolo tse bobebe tsa alloy.

• E ntlafatsa ho nepahala le polokeho ea likarolo tse kopaneng.

D, Metal Art & Craft Detailing

• E ntle bakeng sa tšepe e sa hloekang, koporo, aluminium, esita le lehong le thata.

• E loketse ho betla, ho betla le ho fana ka lintlha tse ntle.

E, Hardware ea Kaho le Thepa ea tšepe e sa hloekang

• Seam ho boreleli holim'a lisebelisoa tsa tšepe tse sa hloekang, liphaephe le mamati.

• E ka sebelisoa ka li-angle grinders kapa lisebelisoa tsa rotary bakeng sa ho qeta setšeng.