Tungsten carbide hard alloy strip e retangular bar

Lehae

ITEANYE LE RONA

Tungsten carbide hard alloy strip e retangular bar

Boitsebiso: 100% lisebelisoa tse tala

Sehlopha: K10,K20

Nako e telele ea bophelo ka ho sebelisa likarolo tsa ho roala

Kopo: lisebelisoa tsa ho itšeha

Email：

info@cdcarbide.com

Maikutlo

Tungsten carbide hard alloy strip e retangular bar

Tlhaloso ea Tungsten carbide hard alloy strip e retangular bar

Tungsten carbide strip e thatafalloa haholo, 'me ke khetho e ntle eo motho a ka e sebelisang ha a seha.

Ka thepa e tala ea boleng bo holimo le lisebelisoa tse tsoetseng pele, CD ea Zhuzhou e fana ka lithipa tsa carbide tsa boleng bo holimo ho bareki.

Ho bonolo ho ba brazed, ho hanyetsa ho apara hantle le ho thatafala.Untrafine lijo-thollo boholo thepa e tala ho boloka matla a babatsehang le ho thatafala.Ka bobeli li-saese tse tloaelehileng le tsa ho ikhethela li fumaneha.

Kereiti ea Tungsten carbide hard alloy strip e retangular bar

Thepa le lisebelisoa tsa carbide strip
Kereiti	Botenya	T.R.S MPa	Ho thatafala HRA	Ts'ebetso le ts'ebeliso e ea khothaletsoa
CD6	14.9	2150	90	Ho se mamelle, ho sebelisoa bakeng sa patsi e thata, e sebelisoang sebetsa patsi ea pele, aluminium section bar, rod le tšepe.
CD6A	14.9	1860	92	Has wear resistance higher than YG6, used for ho lokisa lehong le thata, lehong la pele, aluminium karolo bar, brass rod le tšepe.
CD8	14.7	2320	89.5	Rear le percussion resistance , e sebelisoang ho sebetsa lehong le thata, lehong le bonolo, ferrous le non-ferrous.
CD2T	14.5	2350	92	Carbide e ntle, e hanyetsanang le liaparo tse phahameng, tse kobehang haholo matla, ho hanana hoho ho ho tlamahanoa, matlafatsi a phahameng matla. Mechini ea li-alloys, tse se nang letheba tšepe le tšepe e phahameng manganese, joalo-joalo.
CD25	14.5	2150	92.2	Apara ho hanyetsa le matla ho feta ha ho bapisoa, e loketse ho sebetsa aene, non-ferrous,metal le non-metallid lisebelisuoa.
CD10X	14.45	91.8	3000	Apara ho hanyetsa le matla a holimo ha a bapisoa, a loketse ho etsa tšepe e entsoeng ka tšepe, tšepe e se nang ferrous le thepa e seng metallid.
Other grades of strips may be offered according to customers' requirement.

Tshebediso ya Tungsten carbide hard alloy strip retangular bar

E ka sebelisoa e le li-cutters ho seha tšepe e entsoeng ka tšepe, litšepe tse nonferrous, polasetiki, fiber ea lik'hemik'hale, tšepe e sa hloekang le tšepe e phahameng ea Manganese, joalo-joalo, le ho etsa lisebelisoa tsa ho cheka, lisebelisoa tsa morafo, lisebelisoa tsa ho senya, litekanyo tsa ho lekanya, likarolo tsa ho roala, li-cylinder liner, ho nepahala. dibering, nozzles le hlobo ea tšepe, joalo-joalo.
1.E loketse ho phekola lehong le tiileng, letlapa la ho kuta le letlapa la fiberboard le bohareng.
2.E sebelisetsoe ho etsa lisebelisoa tsa mapolanka, tse kang sesebelisoa sa ho etsa, reamer, serrated thipa le lehare le fapaneng.
3.e loketseng ho sebetsa lehong le thata, lehong la pele hammoho le bar ea karolo ea aluminium, molamu oa koporo.
4, Haholo-holo e sebelisoa e le lisebelisoa tsa ho itšeha bakeng sa lathe ea semi-automatic, lathe ea othomathiki le mochini oa moralo.
5, E sebelisoa e le malebela a VSI rotor bakeng sa mochini o pshatlang lejoe.
6, E sebelisoa e le likhetla tsa polasetiki le koae.

7, E sebelisoa haholo e le seporo sa Tataiso bakeng sa mochini o silang o se nang setsi.

8, Tungsten carbide strip e boetse e loketse tlhahiso ea mefuta e fapaneng ea li-motors, li-punch tsa elektroniki tse tsoelang pele, jj.

Lihlahisoa tsohle li tlameha ho hlahlobjoa ka tieo le ultrasonic mme ke feela tse se nang kotsi e kang pore e ka romelloang kantle. Boima bo phahameng, ho roala ho phahameng & khanyetso e matla, e ba isang nako e telele ea bophelo.

Lisebelisoa tsohle li lekoa ho latela boima, boima le T.R.S pele li sebelisoa.

LBH:

Q1: Na u fektheri kapa k'hamphani ea khoebo?
Re Factory e nang le lilemo tse 12 tsa boiphihlelo ba tlhahiso.

Q2: Feme ea hau e hokae?
Re fumaneha toropong ea Zhuzhou, profinseng ea Hunan moo ho nang le setsi sa tungsten carbide .

Q3: Na theko ea tlhōlisano?
Re na le Feme ea rona. Ka lebaka la tsamaiso e matla ea tlhahiso le kabo, re tšepisa ho fa bareki ba rona theko ea tlhōlisano ka ho fetisisa.

Q4: Na lihlahisoa li Phahameng ka ho Fetisisa?
Ee. Lihlahisoa tsohle li tla lekoa pele ho tlhahiso e ngata, 'me re tla hlahloba thepa ea' mele, sebōpeho le mamello bakeng sa ho netefatsa lihlahisoa tse tšoanelehang pele li romelloa.

Ikutloe u lokolohile ho ikopanya le 'na:

Aimee
Mookameli oa thekiso

Zhuzhou Chuangde Cemented Carbide Co. Ltd
215, building 1, International Students Pioneer Park,
TaishanRoad, Setereke sa Tianyuan, Zhuzhou City.
Lengolo-tsoibila:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
Whatspp/wechat/Skype : 0086 13786352688

LIHLAHISO TSE HLAHANG