tungsten carbide round carbide button gripper kenya le malebela

Lehae

ITEANYE LE RONA

tungsten carbide round carbide button gripper kenya le malebela

lintho tse bonahalang: tungsten carbide

Kereiti: YG10,YG11C,YG15

Likarolo: Boima bo phahameng le ho hanyetsa ho roala

Kopo: Ho cheka, Mechini ea merafo

Email：

info@cdcarbide.com

Maikutlo

tungsten carbide round carbide button gripper kenya le malebela

Tlhaloso ea Sehlahisoa:

tungsten carbide round carbide button gripper inserts and tips

Likotoana tsa likonopo tsa Carbide bakeng sa lebala la oli

Likotoana tsa likonopo li sebelisoa haholo-holo bakeng sa likotoana tsa li-tri-cone bakeng sa ho chekoa ha masimo a oli le khase le morafo o moholo o bulehileng. 'Me li entsoe ka Tricone bit,PDC bit, horizontal directional driling system(HDD), e nang le botsitso bo botle ba sehlahisoa, ho netefatsa polokeho le ts'epahalo ea merafo e tebileng.

Likarolo tsa sehlahisoa:

Kereiti	Botenya	T.R.S	Ho thatafala	Ts'ebetso le ts'ebeliso lia khothaletsoa	Hoo e ka bang Kereiti naheng ea China
Kereiti	g/cm3	MPA	HRA	Ts'ebetso le ts'ebeliso lia khothaletsoa	Hoo e ka bang Kereiti naheng ea China
CD6	14.9	2100	90	Bakeng sa meqhaka ea ho roala, likotoana tsa ho cheka mashala a motlakase, likhetho tsa ho seha mashala, likotoana tsa likhoune tsa oli le likotoana tsa thipa, usd ho phuputso ea jeoloji, merafong ea mashala le oli e tenang.	YG6
CD6.1	14.7	2400	89.5	Bakeng sa meqhaka ea ho roala, likotoana tsa ho cheka mashala a motlakase, likhetho tsa ho seha mashala, likotoana tsa ho phunya likhoune le likotoana tsa thipa, e sebedisoang ho tjhebong ka jeoloji, merafong ya mashala le ho tjhesa sediba sa oli.	YG8
CD06H	15	3000	90.5	Matla a matle le ho se khathatse ho fokolang, bakeng sa likotoana tsa ho cheka hamore hamore le liboro tse boima tsa majoe, bakeng sa mafika a thata le a thata haholo.	YK05, KK06H
CD15	14	2500	87.5	Matla a matle le ho se khathatse ho fokolang, bakeng sa likotoana tsa ho cheka hamore hamore le liboro tse boima tsa majoe, bakeng sa mafika a thata le a thata haholo.	YG15
CD10	14.7	2450	88.5	E sebelisoa haholo joalo ka likonopo tsa likotoana tse nyane le tse mahareng le joalo ka lisebelisoa tsa rotary prospecting bits ho khaola libopeho tse bonolo le tse mahareng tse thata.	YG8C
CD15	14.7	2450	87.8	E loketse ho hlobolisa, likonopo tsa conical bakeng sa rotary, percussion-resistant, Geological prospecting, dikonopo, sehiloeng bonolo le mahareng a thata formations.	YK15/YG9C

Melemo ea rona:
1.Using over 100 % high purity tungsten carbide powder, e na le matla a molemo le boima bo kopantsoeng le bophelo bo bolelele ba tšebeletso ho feta bo tloaelehileng.

2.Ho nka mochine oa khatiso oa isostatic, konopo ea rona ea "drill bit" e na le boima bo lekaneng 'me ha e robehe habonolo.
3.HIP sintered, eketsa matla haholo kahoo eketsa nako ea tšebeletso; khanyetso ea abrasive ea konopo ea carbide e ka eketseha ka 24%.
4.E hahiloe ke grinder e se nang setsi, e na le tekanyo e nepahetseng. E kenngoe ka thata, e se ke ea theoha ho tloha ho phunya.
5.Tlhaloso e felletseng ea mefuta le litlhaloso tse fumanehang.
6.10 baenjiniere ba sebetsa hammoho bakeng sa lipotso tsa hau tsa tekheniki.

Lisebelisoa tsohle li lekoa ho latela boima, boima le T.R.S pele li sebelisoa.

LBH:

Q1: Na u fektheri kapa k'hamphani ea khoebo?
Re Factory e nang le lilemo tse 12 tsa boiphihlelo ba tlhahiso.

Q2: Feme ea hau e hokae?
Re fumaneha toropong ea Zhuzhou, profinseng ea Hunan moo ho nang le setsi sa tungsten carbide .

Q3: Na theko ea tlhōlisano?
Re na le Feme ea rona. Ka lebaka la tsamaiso e matla ea tlhahiso le kabo, re tšepisa ho fa bareki ba rona theko ea tlhōlisano ka ho fetisisa.

Q4: Na lihlahisoa li Phahameng ka ho Fetisisa?
Ee. Lihlahisoa tsohle li tla lekoa pele ho tlhahiso e ngata, 'me re tla hlahloba thepa ea' mele, sebōpeho le mamello bakeng sa ho netefatsa lihlahisoa tse tšoanelehang pele li romelloa.

Ikutloe u lokolohile ho ikopanya le 'na:

Aimee
Mookameli oa thekiso

Zhuzhou Chuangde Cemented Carbide Co. Ltd
215, building 1, International Students Pioneer Park,
TaishanRoad, Setereke sa Tianyuan, Zhuzhou City.
Lengolo-tsoibila:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
Whatspp/wechat/Skype : 0086 13786352688

LIHLAHISO TSE HLAHANG