Ibha yentonga ye-tungsten eyenziwe ngesamente yokwenza izixhobo zokusila

Ekhaya

QHAGAMSHELANA NATHI

Ibha yentonga ye-tungsten eyenziwe ngesamente yokwenza izixhobo zokusila

IBakala: K10,K20,K30,P10,P20,P30,M10,M20.

Ubunzima 91.2HRA - 94HRA

Izinto eziphathekayo: I-100% ye-Virgin Tungsten Carbide

I-imeyile：

info@cdcarbide.com

Ingxelo

Ibha yentonga ye-tungsten eyenziwe ngesamente yokwenza izixhobo zokusila

IiNgxowa zeCarbide eziQiniweyo zeTungsten

Imveliso

1. 100% virgin raw materials.

2. Iindidi ezahlukeneyo zamabakala ziyafumaneka ngokusekelwe kwisicelo somthengi.

3. sinomgca wemveliso ophucukileyo kunye nezixhobo ze-inspection ukuqinisekisa iimveliso ezikumgangatho ophezulu.

4. Ukuchaneka kweGround kunye nenkqubo yokupolisha ephezulu

5. Ukumelana nokunxiba okuphezulu, ubunzima obuphezulu kunye nokuqina kwempembelelo

6. Ubuchwephesha obuphezulu , ukugaya okuchanekileyo.

Uluhlu lwezinto eziphathekayo

1. Inkcazo yoHlobo: ØD×L

2. Isicelo: ukwenza izixhobo zokusika, umzekelo i-end Mills, i-dental burs, i-reamer njl.

3. Ububanzi: 3mm ukuya 30mm

4. Ubude: umgangatho 330mm/310mm okanye ngokwezifiso

5. Umphezulu: ungenanto okanye umhlaba

6. Izinto eziphathekayo: WC + CO

Igama lemveliso	Iintonga ze-carbide eziqinileyo zingenanto kunye nomhlaba
Izinto eziphathekayo	WC+CO
IBanga	K05-K40
Ubungakanani benkozo	kulungile, phakathi
Ukuqina	87.6-94HRA
T.R.S	3000-4200
Umphezulu	ingenanto okanye umhlaba
Isicelo	Isetyenziselwa ukwenza izixhobo zokusika ezifana nee-endmill, iidrili, iireamers kunye nee-dental burrs

Ibakala kunye nokusetyenziswa kwe-tungsten carbide rods

IBanga	ISO	Ubungakanani beenkozo	Umxholo weCobalt (wt-%)	Ubuninzi be-g/cm3	UBUNZIMA HRA	TRS (N/mm2)	UKUSEBENZA
K10UF	K05-K10	0.6	6.0	14.8	94	3800	Ubungakanani bengqolowa obucokisekileyo, obunokumelana nokunxiba okuphezulu ukumelana neendmill kunye nezixhobo zokukrola ziyanconywa.zilungele ukusika iPCB kunye neplastiki.
CD6	K10	1.0	6.0	14.95	92	3000	I-Drilk endmill kunye ne-burr iyanconywa.Ingakumbi ifanelekile ukusika isinyithi esingenantsimbi kunye negraphite (i-coating iyadingeka).
K20UF	K20	0.7	8.0	14.6	92.5	3200	Ukusika i-aluminiyam ngokukodwa.
K40UF	K30	0.6	10	14.4	91.8	3000	I-drill kunye ne-endmill iyacetyiswa. Ifanelekile ukusika i-steek engenakunqanda ukushisa kwe-alloy kunye nentsimbi.
CD15	K40	1.5	15	14	87.6	4000	Ilungele ukwenza i-punching yokubumba, izixhobo kunye ne-anti-vibration boring bar njl.

Zonke izixhobo zivavanywa ngokobulukhuni, ubuninzi kunye ne-T.R.S ngaphambi kokusetyenziswa.

FAQ:

Q1: Ngaba uyiFactory okanye inkampani yokurhweba?
SiyiFactory kunye neminyaka eyi-12 yamava emveliso.

Q2: Uphi umzi-mveliso wakho?
Sifumaneka kwisixeko saseZhuzhou, kwiphondo laseHunan apho isiseko se- tungsten carbide .

I-Q3: Ngaba ixabiso liyakhuphisana?
SineFactory eyethu. Siyabulela kwimveliso eyomeleleyo kunye nenkqubo yokuhambisa, sithembisa ukunika abathengi bethu elona xabiso likhuphisanayo.

I-Q4: Ngaba iimveliso zikumgangatho ophezulu?
Ewe. Zonke iimveliso ziya kuvavanywa phambi kokuveliswa kobuninzi, kwaye siya kujonga iipropati ezibonakalayo, imilo kunye nokunyamezela ukuqinisekisa iimveliso ezifanelekileyo ngaphambi kokuthunyelwa.

Nceda uqhagamshelane nam:

Aimee
Umlawuli wentengiso

Zhuzhou Chuangde Cemented Carbide Co
215, building 1, International Students Pioneer Park,
I-TaishanRoad, iSithili se-Tianyuan, iSixeko sase-Zhuzhou .
I-imeyile:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
Whatspp/wechat/Skype : 0086 13786352688

IIMVELISO EZINXULUMENEYO