Tungsten carbide mold punch stamping intloko ebandayo die bushing mold

Inkcazo

Into	I-tungsten carbide iyafa
IBanga	YG6, YG8, YG11, YG12, YG15, YG20, YG20C, YG22C, YG25C, G5,G20,G30,G40,G50
Ubungakanani	umgangatho okanye ngokwezifiso.
Uphawu	CD
Ilizwe lemveli	Zhuzhou, China
Ukusetyenziswa	die casting mold, punch dies, wire drawing die, machine mold, progressive die, extrusion die, cinezela ukungunda, iinxalenye zokungunda, ukucheba ukufa, intloko ebandayo yokufa, ukubumba ukubumba, ukufa okubandayo njl.

Isicelo

I-1.I-tungsten carbide die blanks isetyenziselwa ukugqiba ukubumba ukubumba, i-punch dies, i-wire drawing die, i-mold machine, i-progressive die, i-extrusion die, i-mold mold, i-mold part, i-trimming die, i-cold heading die, i-forging mold, i-cold forming die njl.

2. I-Zhuzhou Chuangde inezona mpahla zokubumba ezifumanekayo zeesayizi ezahlukeneyo ze-carbide iyafa nto leyo igcina iindleko ezininzi kubathengi bethu.

3. I-Zhuzhou Chuangde inamabakala abanzi kakhulu kwaye azinzile kwi-carbide efa kwaye inexabiso eliphezulu lokusebenza xa kuthelekiswa ne-Kennametal, i-Cbcarbide.

4.Sinebakala elifanayo neG5/G20,GT55 okanye G20,G30,G40,G50

IBanga

Ubungakanani (mm)

Ukusuka kwidayamitha yangaphandle φ10-φ200,idayamitha yangaphakathi φ1-φ90,Ubude bungahlengahlengiswa ngokweemfuno zakho.

Sinezitokhwe ezininzi ezityebileyo zokungunda kuzo zonke iintlobo zokufa .Iya kugcina iindleko zakho zokungunda kwaye ufumane inzuzo engcono .

Ukunyamezela :izikhewu zi OD :+/-1 okanye +/-0.5, ID :-1 ,Ubude : +/-1, okanye +/-0.5 okanye ngokweemfuno zakho.

Ukunyamezela komhlaba : OD +/-0.01. I-ID:+/-0.03, Ubude :+/-0.01 ,I-Concentricity inokufikelela ku-0.02/0.03

Zonke izixhobo zivavanywa ngokobulukhuni, ubuninzi kunye ne-T.R.S ngaphambi kokusetyenziswa.

FAQ:

Q1: Ngaba uyiFactory okanye inkampani yokurhweba?
SiyiFactory kunye neminyaka eyi-12 yamava emveliso.

Q2: Uphi umzi-mveliso wakho?
Sifumaneka kwisixeko saseZhuzhou, kwiphondo laseHunan apho isiseko se- tungsten carbide .

I-Q3: Ngaba ixabiso liyakhuphisana?
SineFactory eyethu. Siyabulela kwimveliso eyomeleleyo kunye nenkqubo yokuhambisa, sithembisa ukunika abathengi bethu elona xabiso likhuphisanayo.

I-Q4: Ngaba iimveliso zikumgangatho ophezulu?
Ewe. Zonke iimveliso ziya kuvavanywa phambi kokuveliswa kobuninzi, kwaye siya kujonga iipropati ezibonakalayo, imilo kunye nokunyamezela ukuqinisekisa iimveliso ezifanelekileyo ngaphambi kokuthunyelwa.

Nceda uqhagamshelane nam:

Aimee
Umlawuli wentengiso

Zhuzhou Chuangde Cemented Carbide Co
215, building 1, International Students Pioneer Park,
I-TaishanRoad, iSithili se-Tianyuan, iSixeko sase-Zhuzhou .
I-imeyile:info@cdcarbide.com
Tel:+86-731-22506139
Mobile:+8613786352688
Whatspp/wechat/Skype :  0086 13786352688